Instructions for Using One Touch Side

Currently, the sensors are unable to identify hanging or small obstacles, as well as barbed wire, guardrails, fences, etc. Therefore, do not use the function on cliffs and the side of roads with steps. If the function is used in the environment above, pay special attention to ensure that the environment is suitable and safe. In addition, always pay attention to the actual distance between the vehicle and the reference object, always be ready to take full control of the vehicle if necessary to avoid collisions and accidents. Keep the exterior rearview mirror unfolded when using the function to ensure that the left/right surround view camera operates properly. It is not recommended to use one touch side parking function when the vehicle is on a road with potholes, bumps, ditches, and slope angles of more than 5°, in a dark or poor lighting environment, and in adverse weather environments such as heavy rain, fog or snow. If the surface of the surround view camera is stained or blocked, it will affect the sensor’s perception capability. Please check the surface status of the camera and clean it as soon as possible before using the function. Do not use One Touch Side if anything, such as a ball hitch, bike rack, or trailer, is attached to the tow hitch. The warnings, limitations, or error examples above do not cover all of the conditions that may affect the correct operation of the one touch side parking function, therefore the user must remain attentive when using the function.