Seat Headrest
Chapter 4 · Manual page 158
Adjust the height of the headrest so that its top is in line with the top of the occupant’s head. This position may reduce the risk of neck injuries in the event of a collision. Do not adjust or remove the headrest while driving.
Do not hang anything on any headrest or headrest rod.
The headrest is designed to prevent rearward movement of the head in the event of a collision or emergency braking, thereby reducing the risk of head and neck injuries.
Both the front and rear headrests are manually adjustable.
When adjusting a headrest from low to high position, pull it directly upward, and gently press it downward after it reaches the desired height to make sure that it is locked in position. To remove the headrest, press and hold the guide sleeve button (as indicated by the arrow) on the side of the headrest, and then pull the headrest upward to remove it.
When adjusting a headrest from high to low position, press the guide sleeve button (as indicated by the arrow) on the side of the headrest, and press the headrest downward; release the button after it reaches the desired height, and gently press the headrest downward to make sure that it is locked in position.