Child Restraints Groups and Installation Position

Only approved child restraints suitable for children are allowed. Children taller than 1.5m may directly use the seat belts in the vehicle. Child restraints must comply with relevant regulations or standards, such as AUS regulations AS/NZS 1754-2013. Recommended Child Restraint Systems AS/NZS 1754-2013 classification is based on a child’s height

Mass Group	Recommended a)
Type A (Birth to 12 months)	Britax Safe n Sound Unity
Type B (Birth to 4 years of age)	MaxiCosi Moda
Type E (4 to 8 years of age)	Britax Safe n Sound Hi-Liner SG
Type F (4 to 10 years of age)	Britax Safe n Sound Kid Guard
Note: a) Always refer to the CRS manual for instructions of use.
Suitable Seats for Attaching Child Restraint Systems
	Seating Position
---	---
Seating Position	Front Driver
Seating position suitable for universal belted(yes/no)	No
I-Size seating position(yes/no)	No
Seating position suitable for lateral fixture(L1/L2)	No
Largest suitable rearward facing fixture (R1/R2x/R2/R3)	No
Largest suitable forward facing fixture(F1/F2x/F2/F3)	No
Largest suitable booster fixture(B2/B3)	No
Note: • 1When installing a CRS on the second row center seat, pull the buckle out to ensure that the CRS is in a correct and stable position. • 2Only applicable for installation with seat belt. • During the installation of the CRS, the backrest angle of seats should be adjusted reasonably to ensure that the CRS remains stable. • During the installation of the CRS, the height of the headrest should be adjusted reasonably or the headrest should be removed to make the backrest of CRS be flat to the vehicle seat. Do not remove the head restraint when using a booster cushion with no backrest. Ensure all removed head restraints are stowed safely. Refit the head restraint once the CRS has been removed.