Window Operation

The electric windows can be operated when the vehicle is powered on (Doors should be closed during operation). Press the switch (1-4) to lower the window, and pull up the switch to raise the window. Release the switch, the window will stop moving (unless in “one-touch” mode). “One-touch” Down The window control switches (1-4) for all doors are equipped with two positions; short press to the 2nd position, and the window will automatically fully open. When the window is moving down, its movement can be stopped at any time by operating the switch again. “One-touch” Up and Anti-pinch All window switches have the “One-touch” Up and “Anti-pinch” function. When short pressing the window control switch, the window will automatically ascend to close. Window movement can be stopped at any time by briefly operating the switch again during ascent. The “Anti-pinch” function is a safety feature which prevents the window from ascending and descends a preset distance automatically if an obstruction is sensed.

Rear Window Isolation Switch Press the switch (5) to isolate the rear window controls (an indicator lamp in the switch illuminates), and press it again to restore control.

“Lazy Lock” Function “Lazy Lock” function can close the windows from outside. When the vehicle is powered off and the driver door is closed, press the remote key lock button for several seconds till the window starts to slide to fully close the four windows.

Automatic Window Closing during Vehicle Locking When the vehicle is powered off and the doors are closed, press the lock button on the key, and the vehicle will be locked, with the window automatically rising to fully closed state. This function can be set in the “Vehicle Settings” interface on the entertainment display.